Testing traffic output

To test that traffic is being output through port 1754
  1. Click Start > Programs > Accessories > Communications > Hyperterminal.
  2. After Name type Traffic.
  3. Ensure that the red telephone icon is selected.

    See the following figure.

    Figure 1. Red Telephone Icon


  4. Click OK.
  5. After Connect using, select TCP/IP.
  6. After Host address, type the IP address of the 3300 ICP
  7. After Port number, type 1754.
  8. Click OK.
  9. Wait the Period Length you selected in the Traffic Options Assignment form, for example 15, 30 or 60 minutes. The traffic should then output to your screen.
  10. After the output is complete, you can disconnect and close the hyper terminal window.
Parent topic: PROGRAMMING TRAFFIC DATA COLLECTION FOR THE 3300 ICP