To add a new dialer (pager):
From the navigation tree, click Offline Configuration > Edit Offline Configuration. The Offline Configuration navigation tree opens.
When prompted to Duplicate Active Configuration, click Yes.
From the navigation tree, click Dialers (Pagers) and then click Add.
In the Number field, enter the index number (0-15) of the dialer (pager) system or click Next Available to use the next unused number.
In the Name field, enter a descriptive name that identifies this pager system. (For example, "553 exchange".)
In the Access Code field, enter the code (1-24 characters) that is common to mailbox owners using this pager system.
In the Hold Time field, Enter the number of seconds (0-90) the server holds a call before hanging up after a successful send attempt. (2 to 5 seconds is recommended.)
Click Add.
In the navigation tree, select Commit Changes and Exit. Confirm the commit. Your changes are now saved to the duplicate (inactive) configuration. Configuration changes will not take effect until you have activated the inactive configuration.
Note: If, after the setup is complete, the pager fails to outdial, a system reboot may be required to enable the pager systems.
To edit an existing dialer (pager):
From the navigation tree, click Offline Configuration > Edit Offline Configuration. The Offline Configuration navigation tree opens.
When prompted to Duplicate Active Configuration, click Yes.
Click Dialers (Pagers) and then select the pager you want to edit by selecting its check box and then clicking Edit.
Edit the Name, Access Code, and Hold Time fields as required and then click Save.
In the navigation tree, select Commit Changes and Exit. Confirm the commit. Your changes are now saved to the duplicate (inactive) configuration. Configuration changes will not take effect until you have activated the inactive configuration.
From the navigation tree, click Offline Configuration > Edit Offline Configuration. The Offline Configuration navigation tree opens.
When prompted to Duplicate Active Configuration, click Yes.
Click Dialers (Pagers) and then select the pager you want to delete by selecting its check box and then clicking Delete. A confirmation message is displayed.
Click Yes to delete the selected pager.
In the navigation tree, select Commit Changes and Exit. Confirm the commit. Your changes are now saved to the duplicate (inactive) configuration. Configuration changes will not take effect until you have activated the inactive configuration.