Import and Restore Saved Telephony Data through PC-Regen

After installing the new MX-ONE, the following steps need to be performed in PC-Regen for successful regeneration of the telephony data from the old MX-ONE system into the new MX-ONE system.

To restore the telephony data into the new MX-ONE system, the created Init-files first have to be transferred.

• Zip the folder mentioned in the Target path on the main window of the PC-Regen-compact application. Name it pcregenTarget.zip

• Connect the host system to the new MX-ONE system through the file transfer tool.

• Connect to MX-ONE through SSH, do as following:

  • Log on by providing a user name and password.

  • Type in the following command to unzip the target file: serverLim1/tmp/upgrade # unzip pcregenTarget.Zip.

  • Type in the following command to remove formatting: serverLim1/tmp/upgrade # dos2unix *.

  • Type in the following command at the prompt: serverLim1/tmp/upgrade # mdsh REGENCMD.TXT I tee upgradeLog.txt.

  • Wait till the prompt reappears.This command will run the Init files, restoring the telephony data from the old MX-ONE into the MX-ONE system.

  • Check the file upgradeLog.txt for no or wrong loaded data.

    Note:

    The MX-ONE periodically performs data backups.

  • – Finally, back up the system data by typing in the following command: serverLim1/tmp/upgrade mdsh -c data_backup.

• Exit the SSH sessions and close the file transfer tool.