View RCOS Information

From the Main Menu, select (S) System Maintenance, (R) Reconfiguration, and then (M) Restriction COS.

Select (P) Show System Wide Parameters. The server displays a list of the defined RCOS with their names at the server maintenance console, followed by the system-wide parameters.

From the Main Menu, select (S) System Maintenance, (R) Reconfiguration, and then (M) Restriction COS.

Select (A) Select RCOS and enter the n umber (1 through 64) of the RCOS to view.

Select (S) Show Selected RCOS. The server displays the home NPA, whether numbers without digits to be absorbed are checked, whether exact match numbers are allowed, and whether NPA screening is allowed, for the selected RCOS.

From the Main Menu, select (S) System Maintenance, (R) Reconfiguration, and then (M) Restriction COS.

Select (A) Select RCOS and enter the n umber (1 through 64) of the RCOS to view.

Select (R) Report Selected RCOS. The server displays the following information about the current RCOS:

• Home NPA

• Whether numbers without absorb digits are checked

• Whether exact match numbers are allowed or disallowed

• Whether NPA screening is allowed or disallowed

• Digit absorption table

• Exact match table

• NPA/NXX table

From the Main Menu, select (S) System Maintenance, (R) Reconfiguration, and then (M) Restriction COS.

Select (T) Report All RCOS. The server displays a report of all the defined RCOS with all of their parameter settings.

If you are displaying it at the console, use the following commands to control scrolling:

• To stop scrolling: Press Ctrl-S

• To restart scrolling: Press Ctrl-Q