Verify Configuration Parameters

All Applications Except Paging and Message Delivery

1. From the Main Menu, select (R) Reports.

2. Select (C) Configuration and then select a report configuration type from the following list:

   • C to send the report to the console without pausing

   • P to send the report to the console, pausing as the screen fills

   • F to send the report to a file on the server

   • A to append the report to an existing file on the server, or

   • X to exit report output options (no report)

3. When prompted, enter the number of the line group to which the application is assigned. Examples of valid formats for this response are:

   • 1 to report the configuration of line group 1

   • 1-4 to report the configuration of line groups 1 through 4

   • 1,2,4-7 to report the configuration of line groups 1, 2, and 4 through 7

   • Press Enter to get the configuration of all line groups

The server shows the name of the application assigned to each group specified and displays the parameter settings for that application. To make corrections, go to the appropriate application menu and enter the correct values.

Paging and Message Delivery Applications

1. If you are modifying the Pager or Message Delivery application, go to the Pagers Menu:

   From the Main Menu, select (S) System Maintenance, (R) Reconfiguration, (R) Reconfigure System.

2. Do one of the following:

   • Select (F) Modify Inactive Configuration if you just made a change through the Offline Menu without activating it

   • Otherwise, select (E) Modify Active Configuration.

3. Select (G) Group Selected and enter the Pager Line Group number. Select (M) Modify Application.

4. Select (S) Show Pagers. The server displays the pager system number (index number), pager name, access code, and hold time for each pager.

5. Check the displayed configuration for each pager system against your Pager and Message Delivery Worksheet to verify that it is correct.

6. To make corrections, return to the Pager Systems Supported option, the Define Pagers option, or the Other Features option, and then enter the correct values.

7. When your entries are correct, save the parameter settings.