Vidyo Tenant Credentials

Use this page to enter the parameters required to establish a connection between MiCollab and the Vidyo Portal:

  1. Complete the following pre-requisites. Refer to the Vidyo Product Documentation and the MiCollab Vidyo Quick Reference Administrator Guide for instructions:

    • Deploy and license the Vidyo Portal. Licensing is not controlled from the Mitel Application Management Center (AMC). You must install the Vidyo licenses on the Vidyo system.

    • Assign the Vidyo Portal with a Fully Qualified Domain Name (FQDN) that is resolvable within the network.

    • Create a Vidyo administrator account.

    • Configure Authentication Type and Authentication using Web Service settings in Vidyo administration. Refer to the MiCollab Vidyo Quick Reference Administrator Guide.

  2. Enter the Tenant Name and Tenant URL.

  3. Enter the Tenant Dialing Prefix. The tenant dialing prefix must match the prefix that is programmed on the Vidyo Portal.

  4. Enter an administrator username and password.

  5. Confirm the password.

  6. Click Save. After you enable the Vidyo settings, the UCC Premium User template is updated with Vidyo services settings.

  7. Add Vidyo services to UCC Premium users.

Vidyo Field Descriptions

Field Description Values
Tenant Identification
Tenant Name Enter a name for the Vidyo Tenant. Maximum of 32 alphanumeric characters.
Tenant URL Enter the URL to the Vidyo Portal. For security, it is recommended that you use an HTTPS URL. Maximum of 64 alphanumeric characters. The entry in this field must conform to URL format (for example: https://hostname.com)
Tenant Dial Prefix

Enter the Vidyo tenant dialing prefix. The Vidyo Gateway uses the tenant dialing prefix to route external audio participants to the Vidyo meeting room.

Note: You can only change this field if there are no MiCollab users configured with the Vidyo service.

Note: You can only connect one MiCollab to one Vidyo tenant. Multiple tenants are not supported.

The tenant dialing prefix that you enter into this field must match the prefix that is programmed on the Vidyo Portal. If the prefixes do not match, you will receive an error when you attempt to enable Vidyo service for MiCollab users. The error message states that the extension does not start with the Tenant prefix.

Maximum of five digits.
Administrator Credentials
Username Enter the username of the Vidyo Portal administrator account. Maximum of 32 alphanumeric characters.
Password Enter the password for the Vidyo Portal administrator account.
Confirm Password Confirm the password entered above.
Parent topic: About Integrated Directory Services
↑