MiVoice 5000 , MiVoice MX-ONE , and MiVoice Office 400 Network Element Field Descriptions

Type

Select network element type required. Mandatory.

MiVoice Business, MiVoice 5000 , MiVoice MX-ONE Service Node, or MiVoice Office 400.

System Name

Enter the unique network element name. For example, "MiV5000_3". Mandatory. This field is read-only for the local MiCollab Server network element.

Enter a unique name of between two and 64 characters in length for the network element. The name can consist of alphanumeric and certain special characters. Spaces are allowed.

IP Address

MX-ONE Service Node Manager Redundancy does not influence this setting in MiCollab, but in Provisioning Manager Subsystem, the SNM alias Address should be used.

Optionally it is possible to configure further Network Elements referring to other LIMs – might be one Network Element for each LIM or selected number of LIMs. In this case it is needed to create User Templates/Roles for each Network Element. When assigning for a user in MiCollab Configuration in MX-ONE Provisioning Manager, the Provisioning Manager will try to fetch from MiCollab a Role which has configured as Network Element the LIM IP where the user's extension is initiated. If there is no Role configured with Network Element for this LIM, the Provisioning Manager will try to fetch the Role having Network Element with LIM1 IP. If none of this match, no Role will be shown in Provisioning Manager's MiCollab Configuration.

Standard IP address notation of four sets of one to three digits separated by periods. For example, 192.168.0.1

Zone

Enter a number to identify the Network Zone.

Number from 1 to 999. Default is blank.

FQDN

Enter a Fully Qualified Domain Name for the network element.

Optional

Outgoing Dialing Prefix

Enter the outgoing dialing prefix to be used by MiCollab Client.

Enter a number up to 32 digits in length. Valid digits are 0 to 9. This field is optional.

Call Forward Destination Directory Number

Enter the NP-UM voice mail number to be used by MiCollab Client.

10-digit number maximum.

Call Take FAC

This field defines the Feature Access Code that MiCollab Client users dial on a device to which they want to shift an ongoing call from another device and continue the call without interruption.

The system copies the code from this field to the PBX Node details page of the MiCollab Client Service.

Note: This FAC does not apply to MiVoice Office 250 platform.

MiVoice 5000 default is #70.

MiVoice MX-ONE default is *8#.

MiVoice Office 400 default is blank.

Limit of 16 telephony characters (0-9, *, #)

SIP Conference FAC:

This field defines the Feature Access Code that MiCollab Client users dial to establish a 3-party conference.

MiVoice 5000 default is *40.

MiVoice MX-ONE default is 3.

Limit of 16 telephony characters (0-9, *, #)