ALM0091 - Path Real Time Events Enabled

DESCRIPTION

Path Real Time Events Enabled is set to "No" on the PBX for a Path.

Select “Yes” to generate real-time statistics for the path. The statistics are then sent out to an RS-232 port.

SEVERITY

Minor

IMPACT

This option must be set to "Yes" to enable accurate real-time path reporting.

TROUBLESHOOTING STEPS

  1. Open the 3300 ESM.
  2. On the left, click on Users and Devices => ACD => ACD Paths.
  3. Select the Path you need to modify.
  4. Click Change.
  5. Set Path Real Time Events Enabled to Yes.
  6. Click Save.

NOTE: This alarm will need to be cleared manually by going to YourSite Explorer and clicking on Alarms. Select the alarm in question and click the Snooze button.

APPLIES TO

CCM 6.0 SP1

References