RAID Hard Disk

System/Sub-System

MiVoice Business: Hardware

Description

There is a fault on one of the hard disk drives (MXe controller or MXe Server only).

Alarm Status

The major threshold is 50. The critical threshold is 100.

Possible Cause Corrective Action
A hard disk drive has a fault. If the alarm occurs on the primary drive, replace the hard disk (see Note below). Refer to Mitel Knowledge Base article 06-2806-00012 and KB11-5191-00213. If the alarm occurs on the secondary drive, check the primary drive for faults. (In some cases, the primary drive has a sector error while the secondary drive is fault free.)

References