DISA user has been locked out of the system after reaching the configured amount of attempts. |
-
Enter SHOW FAULT SECURITY maintenance command to help determine cause. Alarm is cleared on next successful DISA login.
- If there are multiple unsuccessful attempts to access the DISA number, consider disabling the DISA number until the investigation is complete.
- Review your DISA policy. Consider increasing account code lengths or changing the public DISA number. Consider replacing DISA access with EHDUs.
|
Several unsuccessful login attempts have been made on the TELNET port. |
-
Enter SHOW FAULT SECURITY to clear alarm.
- Review the software logs to determine the user who entered the incorrect user name.
- Contact the user to confirm attempts.
If it was not the registered user, this indicates a probable hack attempt and you should block the TELNET port access.
|
Security log failed to generate |
- Clear the alarm by entering the SHOW FAULT SECURITY maintenance command.
- Collect System Diagnostics logs and contact Mitel product support
|