Bandwidth Limit

System/Sub-System

MBG: Software

Description

This alarm indicates a bandwidth limit condition has been reached, and MBG must limit calls.

Note: this alarm presents only if a bandwidth limit has been configured on MBG. Otherwise, it has no knowledge of link capacity.

Alarm Status

Major: When calls are being rejected.

Possible Cause Corrective Action
The configured bandwidth has been exceeded by the number of active RTP streams.
  1. Provision more WAN bandwidth and raise the limit appropriately.
  2. Consider reducing the number of configured users on this node.
  3. Review MBG bandwidth metrics graph monthly to see if it is approaching the limit.

References