Emergency mode

This activity turns on or off emergency mode for your account, allowing you to route interactions differently based on the configured setting.

Table 1. Emergency mode action - Inputs
Parameters	Description
Operation	Options are 'Check' to check the current status or 'Set' to set the status.
Status	Used when Operation is set to 'Set'. Options are 'Enabled' to set emergency mode or 'Disabled' to clear emergency mode.

Table 2. Emergency mode action - Outputs
Parameters	Description
BranchId	'Success' or 'Failure' depending on whether the operation succeeds or fails.
BranchResult	Current emergency status.