Configuration Overview

The MBG interface displays the following configuration tabs and sub-menus:

Tab	Sub-menu	Tasks
System	Dashboard	view/configure status and system information, plus enable/disable MBG service
	Metrics	view statistical information like Connections, Active Calls, and Calls per Hour
	Connectors	view detailed status of all connectors
	Settings	view/edit advanced system settings (service parameters, global settings, MiNet options, SIP options, logging configuration)
	Trust Store	view the list of certificates in the configurable trust store
	Bulk provisioning	manage device data
Network	Profiles	pre-configured profiles you can use to set up your network configuration
	ICPs	set up the ICP or system that interacts with MBG
	Port ranges	set the range of ports available for use by MiNET and SIP calls
	IP blocking	view/configure network activities in real-time and block or allow connections between MBG and specific network blocks in CIDR format
	IP Translations	view/configure IP translation rules
	Bandwidth management	view/configure bandwidth management settings for inbound and outbound WAN traffic
	MiNet fallback addresses	configure manual fallback IP address (for device reboot)
Teleworking	Status	view MiNet and SIP profiles and devices
	WebRTC status	view list of WebRTC registered clients and calls in progress
	MiNet	add/edit MiNet phones and devices that connect to the server
	SIP	add/edit SIP phones and devices that connect to the server
	WebRTC	configure the WebRTC gateway to support browser-based voice and video calls
	Application integration	enable/disable Call Recording and configure options for MiVoice Business Console, MiCollab Client, MiContact Center, MiCollab Conference and other applications
SIP trunking	Status	view SIP trunk status
	Configuration	view/configure SIP trunks
	Adaptation	configure SIP adaptation pipelines, and their plugins
Remote proxy	Domain list	view/configure LAN server proxy
	Users	view/configure permissions for remote users
	Proxy applications	view list of applications that support remote management
Call recording	Status	view status of all registered call recording equipment
Call recording	Configuration	configure call recording
Troubleshooting	Diagnostics	Fetch logs for product support: Downloads MBG log files as a single compressed archive. Connectivity Tests: Checks connectivity to ICPs for MiNET, SIP, and TFTP services based on the configured type; SIP trunking endpoints; and application servers such as MiCollab and MiContact Center. If these are configured with a fully qualified domain name (FQDN), a DNS resolution test is also run. Traceroute: Display the route (path) of packets travelling across the IP network to an endpoint. Packet Trace: Capture a log of traffic passing over the network. Teleworker Network Analyzer: Tests voice quality and remote IP Phone connectivity to the MBG server.
	Logging	Primary Service: Controls logging for SIP and MiNet devices, SIP trunks, call recording, and clustering. WebRTC Service: Controls logging of WebRTC user registrations and calls. Management Layer: Controls logging by the management layer components, including the User Interface, database and events system.
	Alarms	set the severity level for individual events. set the thresholds for SNMP traps
	Overrides	view list of configuration overrides

Configuration Steps

The following steps are recommended to configure the MBG solution. You can adjust these steps to suit you own implementation.

To configure MBG:

Program support for devices:
- If MiNet devices will connect to the MBG for teleworking, enable MiNet support and review the MiNet options.
- If MiNet devices will connect to the MBG for call recording, enable MiNet support, enable Call Recording and review the MiNet options.
- If SIP devices will connect to the MBG for teleworking, enable SIP support and review the SIP options.
- If SIP devices will connect to the MBG for call recording, enable SIP support, enable Call Recording and review the SIP options.
Add ICP(s) and Configure the Default ICP.
Configure the Network Profile for the MBG.
Program your services:
- Add the MiNet devices (singly or in bulk)
- Add the SIP devices (singly or in bulk)
- Configure the SIP Trunks (if used) and enable SIP support
- Configure the Call Recording Equipment and Sets (if used)
(Optional) Configure the following:
- IP Translation (for deployments with multiple servers in the DMZ)
- Bandwidth Management
- Applications: MiVoice Business Console; MiCollab Client; MiContact Center; MiVoice Conference Unit.
- Clustering
Start the MBG.