Creating a DID mapping

You must create a DID and assign the OSE to the Receiving Digit field. After you create DID perform the following steps to map the DID:

1. In the Mitel Connect Director, go to Trunk Groups > DID Map.
2. Select the Enable DID check box.
3. Select the DID range.
4. Enter 116 in DID number text box.
5. In the telephony tab, enter the Call Stack depth as 1.
6. Select Standard from Ring type drop down list.
7. Select Enable call waiting tone check box.
8. Select 8 from the Trunk access code drop down list.
9. Click Save.