The Feature Configuration page allows you to program settings on your phone according to your personal preferences. After programming or modifying the settings, ensure that you click Apply to configure and save the information.
The following table lists the settings on the Feature Configuration page:
|
Setting Name |
Value (bold = default) |
Notes |
|
CALL FORWARDING |
||
|
Call Forwarding Always |
On | Off |
Activate/deactivate feature. TO value can be a telephone number, SIP URL, or an IP address. TO default is blank. If left blank, calls will be forwarded to the voice mailbox programmed by your Administrator . |
|
Call Forwarding No Answer |
On | Off |
Activate/deactivate feature. TO value can be a telephone number, SIP URL, or an IP address. TO default is blank. If left blank, calls will be forwarded to the voice mailbox programmed by your Administrator . |
|
After < > Rings |
10 < number> |
Number of ring attempts (1 - 99) before forwarding a call. |
|
Call Forwarding When Busy |
On | Off
|
Activate/deactivate feature. TO value can be a telephone number, SIP URL, or an IP address. TO default is blank. If left blank, calls will be forwarded to the voice mailbox programmed by your Administrator |
|
DO NOT DISTURB |
||
|
Do Not Disturb |
On | Off |
Activate/deactivate feature. Callers will receive a busy signal when On. |
|
ADVISORY MESSAGE |
||
|
Advisory Message |
On | Off |
Activate/deactivate feature. |
|
Advisory Message |
In a Meeting Out of town At lunch On vacation In a Conference In lab Back in 5 minutes Gone Home On a Course Off Sick Other Reason |
To enter a personalized message, select Other Reason. |
|
Custom Message |
<message> |
If Other Reason is selected above, the message in this field will display when Advisory Message is On. Maximum 20 characters. |
|
AUTO ANSWER |
||
|
Auto Answer |
On | Off |
To have the phone automatically answer incoming calls. |
|
CALL HOLD |
||
|
Play Beep While I Am On Hold |
On | Off |
Activate/deactivate feature. If On, beep tone is heard by user when on hold. |
|
Held Calls Will Ring Back After |
60 seconds <delay in seconds> |
Heard by user as reminder that a call is on hold. |
|
CALL WAITING |
||
|
Call Waiting Tone |
On | Off |
Activate/deactivate feature. If On, user hears beep tone is when a call is received. |
|
Missed Calls Display |
On | Off |
Use these settings to enable/disable display of feature messages. You may want to disable these displays to improve readability of RSS feeds or branding. |
|
Call Forwarding/DND Display |
On | Off |
|
|
LCD Backlight |
On | Auto |
|
|
|
|
|
|
|
| |
|
HTML Application URL |
|
URL specifies the HTML application to be loaded. Format is: <Server mode>://<Server address>/<Dir>/<Filename> where Server mode is TFTP or HTTP Server address is an IP or FQDN Dir is the directory path on the server where the file is located Filename is the name of the file to select. It can be an Application Master file (.txt suffix) or an application file name (.spx suffix). Note: if this field is not available (grayed out), see your Administrator. |
Related Topics